Side-Lite S42C Specification Sheet

S42C

SPECIFICATION GRADE, ONE OR TWO-LAMP EMERGENCY
ILLUMINATION FOR 4-PIN COMPACT FLUOERESCENT LAMPS

APPLICATION

Table 1
Lamp(Diameter)	Base	Wattage(Length)	No. of Lamps (Emergency Mode)
Twin/Quad/ Triple Twin/Quadruple Twin-Tube Compact	4-Pin (G24q, GX24q)	18 - 32 W	1 or 2
Twin/Quad/ Triple Twin/Quadruple Twin-Tube Compact	4-Pin (G24q, GX24q)	18 - 42 W	1
Linear Quad	4-Pin (2G10)	18 - 36 W	1 or 2
Linear Quad	4-Pin(2G11)	16 - 28 W	1 or 2
Long Compact	4-Pin (2G11)	18 - 39 W	1 or 2
Long Compact	4-Pin (2G11)	18 - 55 W	1
2D	4-Pin (GR10q)	16 - 38 W	1 or 2
2D	4-Pin (GR10q)	16 - 55 W	1
U-Bent T8, T12	Bi-Pin	16 - 40 W	1 or 2
T8, T9, T10, T12 (1", 1 1/4", 1 1/2")	Single-Pin or Bi-Pin	17 - 40 W (2' - 4')	1 or 2
T8, T9, T10, T12 (1", 1 1/4", 1 1/2")	Single-Pin or Bi-Pin	17 215 W (2' - 8')	1

The S42C fluorescent emergency ballast works in conjunction with the AC ballast to convert new or existing fluorescent fixtures into unobtrusive emergency lighting. The emergency ballast consists of a high-temperature nickel-cadmium battery, charger and electronic circuitry in one compact black case. The S42C can be used with most 16 W through 55 W (4-pin) twin, quad, triple twin, quadruple twin-tube, long compact and 2D lamps; or 17 W through 215 W T8, T9, T10 or T12 fluorescent lamps in applications requiring flexible conduit for remote emergency ballast installation. One or two-lamp operation may be selected (see Table 1). The S42C is also compatible with most 1, 2, 3, and 4-lamp electronic, standard, energy saving, and dimming AC ballasts. If used in an emergency-only fixture, no AC ballast is necessary. The S42C is suitable for use in indoor fixtures EXCEPT air handling heated air outlet fixtures, and wet, damp, or hazardous location fixtures. For information about specific lamp and ballast compatibility, please call the factory. Recommended applications include: higher wattage compact fluorescent fixtures using 42 W (4-pin) triple or quadruple twin-tube or 40, 50 & 55 W long compact fluorescent lamps, or with U-bent T8 lamps in applications requiring flexible conduit for remote emergency ballast installation.

OPERATION

When AC power fails, the S42C immediately switches to the emergency mode, keeping one or two lamps illuminated at a reduced lumen output for a minimum of 90 minutes. The S42C operates one 16 W - 32 W (4-pin) compact fluorescent, or one 17 W - 40 W (2'-4') tubular fluorescent lamp for 120 minutes. When AC power is restored, the S42C automatically returns to the charging mode.

INSTALLATION

The S42C does not affect normal fixture operation and may be used with either a switched or unswitched fixture. If a switched fixture is used, an unswitched hot lead must be connected to the emergency ballast. The emergency ballast must be fed from the same branch circuit as the AC ballast. The S42C may be installed on top of or remote from the fixture. The emergency ballast may be remotely installed up to half the distance the AC ballast manufacturer recommends remoting the AC ballast from the lamp, or up to 50 feet, whichever is less. For simple visual inspection of the charging indicator light and easy operational testing, the test/monitor plate can be installed near the fixture wall switch. It can also be installed in the ceiling near the fixture to ensure an unobtrusive installation. Installation is not recommended with fixtures where the ambient temperature may fall below 0°C.

UL and CODE COMPLIANCE

The S42C has been tested by Underwriters Laboratories in accordance with the standards set forth in UL924 - "Emergency Lighting and Power Equipment," and is UL Listed for factory installation or field retrofit. Emergency illumination time exceeds the National Electrical Code (NEC), Life Safety Code (NFPA-LSC) and UL 90-minute requirements.

BATTERY

Since high temperatures exist in fluorescent fixtures, the S42C uses a specially constructed, high-temperature nickel-cadmium battery. This battery requires no maintenance, and has a life expectancy of 7 to 10 years.

Table 2
Lamp	Lumens
Lamp	1 Lamp	2 Lamps
PL-T 42W/4P, F42QBX, DULUX T/E 42W	1000
PL-T 32W/4P, F32TBX, DULUX T/E 32W	700*	1000
PL-T 26W/4P, F26TBX, DULUX T/E 26W	575*	875
PL-T 18W/4P, F18TBX, DULUX T/E 18W	375*	625
PL-C 26W/4P, F26DBX/4P, DULUX D/E 26W	450*	700
PL-C 18W/4P, F18DBX/4P, DULUX D/E 18W	375*	500
PL-L 50W, F50BX/RS, DULUX L 50W	825
PL-L 40W, F40/30BX, DULUX L 40W	800
PL-L 36W, F39/36BX, DULUX L 36W	675	1000
PL-L 24W, F27/24BX, DULUX L 27W	475*	775
PL-L 18W, F18BX, DULUX L 18W		500
F552D/4P	675
F382D/4P	625	825
F282D/4P	500*	625
F212D/4P	425*	600
F162D/4P	325*	550
FO32, FBO31 T8	725*	1000
FO25, FBO24 T8	675*	925
FO17, FBO16 T8	500*	850
Partial listing of lamps operated. * 120 minutes of emergency illumination.

EMERGENCY ILLUMINATION

Depending on the number (1 or 2), wattage, and type of lamps selected, the S42C produces 325 to 1000 lumens initial emergency light output (see Table 2). If two-lamp operation is selected, light output is evenly divided between the lamps for better distribution of emergency illumination.

SPECIFICATION

Emergency lighting shall be provided by using a standard fluorescent fixture equipped with a SIDE-LITE S42C emergency ballast. This emergency ballast shall consist of a high-temperature, maintenance-free nickel-cadmium battery, charger and electronic circuitry contained in one 12" x 2 3/8" x 1 1/2" black metal case with 2' lengths of flexible conduit at each end. A test/monitor plate with a solid-state charging indicator light to monitor the charger and battery, a single-pole test switch, and installation hardware shall be provided. The emergency ballast shall be capable of operating [one or two] ________ fluorescent lamp(s) (see Table 1) at _________lumens (see Table 2) initial light output in the emergency mode for a minimum of 90 minutes {or one ___________ (see Table 1) fluorescent lamp at __________ lumens (see Table 2) initial light output in the emergency mode for a minimum of 120 minutes}. The S42C shall have 3.5 Watts of input power, a 19.2 Watt-hour battery capacity, and comply with emergency standards set forth by the current NEC. The emergency ballast shall be UL Listed for installation on top of or remote from the fixture, warranted for a full two years from date of purchase, and made in the U.S.A.

WARRANTY

Model S42C is warranted for two (2) full years from date of purchase. This warranty covers only properly installed SIDE-LITE emergency ballasts used under normal conditions. For the warranty period SIDE-LITE will, at its option, repair or replace without charge a defective emergency ballast, provided it is returned to the factory transportation prepaid, and our inspection determines it to be defective under terms of the warranty. Repair or replacement, as stated above, shall constitute the purchaser's exclusive warranty, which does not extend to transportation, installation, labor or any other charges; nor does it apply to any equipment of another manufacturer used in conjunction with the emergency ballast.

Product Summary
UL Listed	Factory or Field Installation
Initial Light Output	325 - 1100 Lumens
Illumination Time	90 Minutes
Test Switch	Single Pole
Charging Indicator Light	LED
Recharge Time	24 Hours
Ballast Temperature Rating	0⁰ to + 55⁰C
Dual Input Voltage	120/277 VAC, 60 Hz
Input Current	280 mA
Battery	High Temperature, Maintenance-Free Nickel Cadmium Battery 7 to 10 Year Life Expectancy
Electrical Rating	3.5 W
Warranty	2 Years (NOT pro-rata)
Weight	4.3 lbs.
Dimensions	12.0" x 2.4" x 1.5" (305 mm x 60 mm x 38 mm) Mounting center 8.9" (226 mm) Two 2' (610 mm) Lengths of Flexible Conduit