Side-Lite

S60FSD

SELF-DIAGNOSTIC WITH AUTOMATIC TESTING TO ENSURE CODE COMPLIANCE

ONE OR TWO-LAMP EMERGENCY ILLUMINATION

APPLICATION

TABLE 1
Lamp Diameter	Base Type	Power Length	# of Lamps Emergency
T8, T9, T10, T12 (1", 1-1/4", 1-1/2")	SIngle Or Bipin	17- 40 W (2'- 4')	1
			2
		40 - 215 W (5'-8')	1
Long Compact	4-Pin (2G11)	18 - 39 W	1
			2
		40 - 55 W	1
Twin/Quad/ Triple/Quadruple Twin-tube compact	4-Pin (G24q, GX24q)	18 - 32 W	1
			2
		42 W	1
2D	4-Pin (GR10q)	16 - 38 W	1
			2
		55 W	1

The S60FSD self-diagnostic fluorescent emergency ballast works in conjunction with the AC ballast to convert new or existing fluorescent fixtures into emergency lighting. The emergency ballast consists of a high-temperature nickel-cadmium battery, charger and electronic circuitry in one compact black case. The S60FSD can be used with most 17 W through 215 W (2' -8') T8, T9, T10, or T12 fluorescent lamps without integral starters, including U-shaped, HO, VHO, circline, energy saving, and (4-pin) twin, quad, triple and quadruple twin-tube compacts. One or two lamp operation may be selected (see Table 1). It is also compatible with most 1, 2, 3, and 4-lamp electronic, standard, energy saving, and dimming AC ballasts. If used in an emergency-only fixture, no AC ballast is necessary. The S60FSD is suitable for indoor fixtures except air handling heated air outlets, and wet, damp, or hazardous location fixtures. For information about specific lamp and ballast compatibility, please call the factory.

OPERATION

During normal operation, the S60FSD constantly monitors charging current and battery voltage. When AC power fails, the S60FSD immediately switches to the emergency mode, keeping either one or two lamps illuminated at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the S60FSD automatically returns to the charging mode. During automated testing, the S60FSD simulates an AC power failure causing the emergency ballast to switch to emergency mode and conduct a discharge test to monitor battery voltage and discharge current. If the S60FSD detects a problem, the status indicator light flashes and, if selected, the audible alarm sounds. When testing is completed, the S60FSD returns to the charging mode. The S60FSD automatically tests emergency lighting for 30 seconds every 30 days, and 30 minutes once a year.

INSTALLATION

The S60FSD does not affect normal fixture operation and may be used with either a switched or unswitched fixture. If a switched fixture is used, an unswitched hot lead must be connected to the emergency ballast. The emergency ballast must be fed from the same branch circuit as the AC ballast. The S60FSD may be installed inside, on top of, or remote from the fixture. The emergency ballast may be remotely installed up to half the distance the AC ballast manufacturer recommends remoting the AC ballast from the lamp, or up to 50 feet, whichever is less. Installation is not recommended with fixtures where the ambient temperature may fall below 0°C.

UL and CODE COMPLIANCE

The S60FSD has been tested by Underwriters Laboratories in accordance with the standards set forth in UL924 Emergency Lighting and Power Equipment. The S60FSD is UL Listed for factory or field installation. Emergency illumination time exceeds the National Electrical Code (NEC), Life Safety Code (NFPA-LSC) and UL 90-minute requirements. Life Safety Code - NFPA 101 (1997) Excerpt 5-9.3 Periodic Testing of Emergency Lighting Equipment. A functional test shall be conducted on every required battery-powered emergency lighting system at 30-day intervals for a minimum of 30 seconds. An annual test shall be conducted for a 30 minute duration. Equipment shall be fully operational for the duration of the test. Written records of visual inspections and tests shall be kept by the owner for inspection by the authority having jurisdiction. Exception: Self-testing/self-diagnostic, battery-operated emergency lighting equipment that automatically performs a minimum 30-sec test and diagnostic routine at least once every 30 days and indicates failures by a status indicator shall be exempt from the 30-day functional test, provided a visual inspection is performed at 30-day intervals.

BATTERY

Since high temperatures exist in fluorescent fixtures, the S60FSD uses a specially constructed, high-temperature nickel cadmium battery. This battery requires no maintenance, and has a life expectancy of 7 to 10 years.

EMERGENCY ILLUMINATION

Depending on the number (1 or 2), wattage, and type of lamps selected, the S60FSD produces 1100 to 1400 lumens initial emergency light output (See Table 2). If two-lamp operation is selected, light output is evenly divided between the lamps for better distribution of emergency illumination.

SPECIFICATION

Table 2
Lamp	Lumens
Lamp	1 Lamp	2 Lamps
FO32, FBO31 T8	1350	1350
FO25, FBO24 T8	1250	1100
FO17, FO16 T8	1050	950*
FO96 T8	1400
F40 T12, F40/U	1100	1100
F48 T12 HO	1200
F96 T12, HO, VHO	1100
F40 T12 ES (34 W)	975*	975*
PL-L 50W, F50BX/RS, DULUX L 55W	900*
PL-L 40W, F40BX/30BX, DULUX L 40W	900*
PL-L 36W, F39BX/36BX, DULUX L 39W	1100	1100
PL-L 24W, F39BX/36BX, DULUX L 39W	975*	975*
F382D/4P	1000*	1100
F282D/4P	1100	1100
Partial Listing of Lamps operated * indicates light output lower than 1100 lumens

Emergency lighting shall be provided by using a standard fluorescent fixture equipped with a SIDE-LITE S60FSD self-diagnostic fluorescent emergency ballast. Electronic circuitry shall be self-testing in design and automatically test emergency lighting for a minimum of 30 seconds every 30 days, and 30 minutes once a year. An embedded microcontroller will continually monitor the battery charging current and voltage. An audible alarm and light-emitting diode shall be provided to indicate test results and status conditions. The self-diagnostic S60FSD shall consist of a high-temperature, maintenance-free nickel cadmium battery, charger and electronic circuitry contained in one 13 3/8" x 2 3/8" x 1 1/2" black metal case. A solid-state status indicator light to monitor the charger, fault condition, and battery, a single-pole test switch, and installation hardware shall be provided. The emergency ballast shall be capable of operating [one or two] _________ fluorescent lamp(s) (See Table 1) at _________lumens (See Table 2) initial light output in the emergency mode for a minimum of 90 minutes. The self-diagnostic S60FSD shall have 4 Watts of input power, a 24 Watt-hour battery capacity, and exceed emergency standards set forth by the current NEC. The emergency ballast shall be UL Listed for installation inside, on top of, or remote from the fixture, warranted for a full five years from date of purchase, and made in the U.S.A.

WARRANTY

Model S60FSD is warranted for five (5) full years from date of purchase. This warranty covers only properly installed SIDE-LITE emergency ballasts used under normal conditions. For the warranty period SIDE-LITE will, at its option, repair or replace without charge a defective emergency ballast, provided it is returned transportation prepaid, and our inspection determines it to be defective under terms of the warranty. Repair or replacement, as stated above, shall constitute the purchaser's exclusive warranty, which does not extend to transportation, installation, labor or any other charges; nor does it apply to any equipment of another manufacturer used in conjunction with the emergency ballast.

Product Summary
UL Listed	Factory or Field Installation
Initial Light Output	1100 - 1400 Lumens
Illumination Time	90 Minutes
Self -Diagnostic Illumination Time	30 Minutes - Annually 30 Seconds - Monthly
Test Switch	Single Pole
Charging Indicator Light	LED
Recharge Time	24 Hours
Ballast Temperature Rating	0⁰ to + 55⁰C
Dual Input Voltage	120/277 VAC, 60 Hz
Input Current	320 mA
Battery Charging Current	320 mA
Battery	High Temperature, Maintenance-Free Nickel Cadmium Battery 7 to 10 Year Life Expectancy
Electrical Rating	4.0 W
Warranty	5 Years (NOT pro-rata)
Weight	3.6 lbs.
Audible Alarm	User-Selectable
Dimensions	13.3" x 2.4" x 1.5" (339 mm x 60 mm x 38 mm) Mounting center 12.8" (325 mm)