Side-Lite S74T Specification Sheet

S74T

THIN SERIES

FOR STANDARD AND HIGH OUPUT T5 AND T8 LAMPS

APPLICATION

Table 1
Lamp (Diameter)	Base	Wattage (Length)	No. of Lamps (Emer. Mode)
T5/HO (5/8")	MINIATURE BIPIN	24 - 54 W	1
T5 (5/8")	MINIATURE BIPIN	14 - 28 W	1
LONG COMPACT	4-PIN (2G11	36 - 55 W	1
T8 (1")	BIPIN	32 W (4')	1
T8 (1")	BIPIN	40 W (5')	1
T8/HO (1")	BIPIN	44 W (4')	1

The S74T "THIN" fluorescent emergency ballast works in conjunction with a low-profile or standard-size electronic AC ballast containing an end-of-life shutdown circuit to convert new or existing standard or high output T5 fluorescent fixtures into unobtrusive emergency lighting. The emergency ballast consists of a high-temperature nickel-cadmium battery, charger and electronic circuitry in one compact case. The S74T can be used with one 14 - 28 W standard or 24 - 54 W high output T5; one 32 W (4'), 40 W (5') and 44 W HO (4') T8 fluorescent lamp; or one 36 - 55 W (4-pin) long compact fluorescent lamp (see Table 1). It is also compatible with most 1, 2, 3, and 4-lamp electronic, standard, energy saving, and dimming AC ballasts. If used in an emergency-only fixture, no AC ballast is necessary. The S74T is suitable for use in indoor-dry locations EXCEPT air handling heated air outlet fixtures, and wet, damp, or hazardous location fixtures. For information about specific lamp and ballast compatibility, please call the factory. Recommended applications include: emergency lighting for pendant, cove, recessed indirect/direct, surface-mount, and architectural lighting commonly used in office, hospitality, health care, retail, and educational facilities.

OPERATION

When AC power fails, the S74T immediately switches to the emergency mode operating one lamp at high lumen output, then at reduced lumen output for a minimum of 90 minutes. When AC power is restored, the emergency ballast automatically returns to the charging mode and delays AC ballast operation for five seconds to prevent false-tripping of AC ballast (end-of-life) shutdown circuits.

INSTALLATION

The S74T does not affect normal fixture operation and may be used with either a switched or unswitched fixture. If a switched fixture is used, an unswitched hot lead must be connected to the emergency ballast. The emergency ballast must be fed from the same branch circuit as the AC ballast. The S74T should be installed inside the fixture. Installation is not recommended with fixtures where the ambient temperature may fall below 0°C.

UL and CODE COMPLIANCE

The S74T has been tested by Underwriters Laboratories in accordance with the standards set forth in UL924 - "Emergency Lighting and Power Equipment," and is UL Listed for factory installation or field retrofit. Emergency illumination time exceeds the National Electrical Code (NEC), Life Safety Code (NFPA-LSC) and UL 90-minute requirements.

BATTERY

Since high temperatures exist in fluorescent fixtures, the S74T uses a specially constructed, high-temperature nickel cadmium battery. This battery requires no maintenance, and has a life expectancy of 7 to 10 years.

Table 2
Lamp	Lumens
FP54, F54T5/HO	700*
FP39, F39T5/HO	620*
FP24, F24T5/HO	390*
FP24, F24T5/HO	390*
FP28, F28T5	700*
FP21, F21T5	620*
FP14, F14T5	430*
F32T8 (4')	635
F40T8 (5')	570
F48T8/HO (4') (44 W)	470
PL-L 50W, F50BX/RS, Dulux L 55W	510
PL-L 40W, F40/30BX, Dulux L 40W	625
PL-L 36W, F39/36BX, Dulux L 36W	610

EMERGENCY ILLUMINATION

The S74T produces 390 to 700 lumens initial emergency light output. During emergency illumination, one lamp is illuminated, even if installed with a multi-lamp AC ballast.

SPECIFICATION

Emergency lighting shall be provided by using a standard fluorescent fixture equipped with a SIDE-LITE S74T ''THIN'' emergency ballast. This emergency ballast shall delay AC ballast operation for five seconds to prevent false-tripping of AC ballast end-of-life shutdown circuits, and consist of a high-temperature, maintenance-free nickel-cadmium battery, charger and electronic circuitry contained in one 18.5" x 1.18" x 1.18" galvanized steel case. A solid-state charging indicator light to monitor the charger and battery, a single-pole test switch, and installation hardware shall be provided. The emergency ballast shall be capable of operating one_______________ fluorescent lamp at_____________ lumens (see Table 2) initial emergency light output in the emergency mode for a minimum of 90 minutes. The S74T shall have 3.2 Watts of input power, a 13.2 Watt-hour battery capacity, and comply with emergency standards set forth by the current NEC. The emergency ballast shall be UL Listed for installation inside the fixture, warranted for a full five years from date of purchase, and made in the U.S.A.

WARRANTY

Model S74T is warranted for five (5) full years from date of purchase. This warranty covers only properly installed Side-Lite emergency ballasts used under normal conditions. For the warranty period Side-Lite will, at its option, repair or replace without charge a defective emergency ballast, provided it is returned to the factory transportation prepaid, and our inspection determines it to be defective under terms of the warranty. Repair or replacement, as stated above, shall constitute the purchaser's exclusive warranty, which does not extend to transportation, installation, labor or any other charges; nor does it apply to any equipment of another manufacturer used in conjunction with the emergency ballast.

Product Summary
UL Listed	Factory or Field Installation
Initial Light Output	390 - 700 Lumens at 25⁰C
Illumination Time	90 Minutes
Test Switch	Single Pole
Charging Indicator Light	LED
Recharge Time	24 Hours
Ballast Temperature Rating	0⁰ to + 55⁰C
Dual Input Voltage	120/277 VAC, 60 Hz
AC Input Current	180 mA
Battery	High Temperature, Maintenance-Free Nickel Cadmium Battery 7 to 10 Year Life Expectancy
AC Input Power Rating	3.2 W
Warranty	5 Years (NOT pro-rata)
Weight	2.3 lbs.
Dimensions	18.5" x 1.18" x 1.8" (470 mm x 30 mm x 30 mm) Mounting center 18.1" (460 mm)