Side-Lite S96F Specification Sheet

S96F

SPECIFICATION-GRADE: UP TO 3500 LUMENS

ONE OR TWO LAMP EMERGENCY ILLUMINATION

APPLICATION

TABLE 1
Lamp Diameter	Base Type	Power (Length)	No. Of Lamps
1", 1-1/4", 1-1/2" (T8, T9, T10, T12)	Single Or Bipin	17-40 W (2'-4')	1
			2
		40- 215 W (5'"-8')	1
Long Compact	4-Pin (2G11)	18-39 W	1
			2
		40-55 W	1
Compact	4-Pin (G24q, GX24q)	18-42 W	1
			2
2D	4-Pin (GR10q)	16-38 W	1
			2
		55 W	1

The S96F fluorescent emergency ballast works in conjunction with the AC ballast to convert new or existing fluorescent fixtures into emergency lighting. The emergency ballast consists of a field replaceable nickel cadmium battery, charger and electronic circuitry in one case. The S96F can be used with most 17 W through 215 W (2' - 8') T8, T9, T10, or T12 fluorescent lamps without integral starters, including U-shaped, HO, VHO, circline, energy saving, and (4-pin) twin, quad, and triple twin-tube compacts (See Table 1). It is also compatible with most 1, 2, 3, and 4-lamp electronic, standard, energy saving, and dimming AC ballasts. If used in an emergency-only fixture, no AC ballast is necessary. The S96F is not suitable for use in wet, damp, or hazardous locations. For information about specific lamp and ballast compatibility, please call us. Recommended applications include: hospital surgical suites, areas along the path of egress with high ceiling heights, as well as health care, educational, and commercial facilities needing higher levels of emergency illumination.

OPERATION

When AC power fails, the S96F immediately switches to the emergency mode, keeping either one or two lamps illuminated for a minimum of 90 minutes. When AC power is restored, the S96F automatically returns to the charging mode.

INSTALLATION

The S96F does not affect normal fixture operation and may be used with either a switched or unswitched fixture. If a switched fixture is used, an unswitched hot lead must be connected to the emergency ballast. The emergency ballast must be fed from the same branch circuit as the AC ballast. The S96F may be installed on top of or remote from the fixture. The emergency ballast may be remotely-installed up to half the distance the AC ballast manufacturer recommends remoting the AC ballast from the lamp, or up to 50 feet, whichever is less. Installation is not recommended with fixtures where the ambient temperature may fall below 0°C for extended periods. A charging indicator light and double pole test switch are provided.
For additional cost, a single pole test switch/monitor plate is provided for remote installation of the test switch and charging indicator.

UL and CODE COMPLIANCE

The S96F has been tested by Underwriters Laboratories in accordance with the standards set forth in UL924 - "Emergency Lighting and Power Equipment," and is UL Listed for factory installation or field retrofit. Emergency illumination time exceeds the National Electrical Code (NEC), Life Safety Code (NFPA-LSC) and UL 90-minute requirements.

BATTERY

The S96F uses a field replaceable, nickel cadmium battery specifically designed and constructed for high temperature applications. This battery requires no maintenance, and has a life expectancy of 7 to 10 years.

EMERGENCY ILLUMINATION

TABLE 2
Lamps	Total Lumens
Lamps	1 Lamp	2 Lamps
FO25, FBO24 T8	2250	2600
FO32, FBO32 T8	3000	3000
FO40 T8	2400
FO96 T8	3000
F40 T12, F40/U	3000	3000
F40 T12ES (34W)	2700	2700
F48 T12/HO	3000
F96 T12	2800
F96 T12/HO	2900
F96 T12/VHO	3300
PL-L 24W, F27/24BX, DULUX L 27W	1800	2300
PL-L 36W, F39/36BX, DULUX L 39W	2900	3500
PL-T 42W/4P	3200	3500
PL-L 40W, F40/30BX, DULUX L 55W	1800
F282D/4P	2050	2800
F382D/4P	1450	2800
Partial listing of lamps operated.

Depending on the number (1 or 2), wattage, and type of lamps selected, the S96F produces 1450 to 3500 lumens initial emergency light output (See Table 2). If two-lamp operation is selected, light output is evenly divided between the lamps for better distribution of emergency illumination.

SPECIFICATION

Emergency lighting shall be provided by using a standard fluorescent fixture equipped with a SIDE-LITE S96F emergency ballast. This emergency ballast shall consist of a field replaceable, high-temperature maintenance-free nickel cadmium battery, charger and electronic circuitry contained in one 16 5/16" x 5 7/16" x 1 3/4" metal case with a 2' length of flexible conduit. A solid-state charging indicator light to monitor the charger and battery, a double-pole test switch, and installation hardware shall be provided. The emergency ballast shall be capable of operating [one or two] _________ fluorescent lamp(s) (See Table 1) at _________ lumens (See Table 2) initial light output in the emergency mode for a minimum of 90 minutes. The S96F shall have 8 Watts maximum of input power, 57.6 Watt-hour battery capacity, and exceed emergency standards set forth by the current NEC. The emergency ballast shall be UL Listed for installation on top of or remote from the fixture, warranted for a full five years from date of purchase, and made in the U.S.A.

WARRANTY

Model S96F is warranted for five (5) full years from date of purchase. This warranty covers only properly installed SIDE-LITE emergency ballasts used under normal conditions. For the warranty period SIDE-LITE will, at its option, repair or replace without charge a defective emergency ballast, provided it is returned transportation prepaid, and our inspection determines it to be defective under terms of the warranty. Repair or replacement, as stated above, shall constitute the purchaser's exclusive warranty, which does not extend to transportation, installation, labor or any other charges; nor does it apply to any equipment of another manufacturer used in conjunction with the emergency ballast.

Product Summary
UL Listed	Factory or Field Installation
Initial Light Output	1450-3500 Lumens
Illumination Time	90 Minutes
Test Switch	Double Pole Single Pole (used only with Test/Monitor Plate, optional)
Charging Indicator Light	LED
Recharge Time	24 Hours
Dual Input Voltage	120/277 VAC, 60 Hz
Input Current	280 mA
Battery	Field Replaceable High Temperature, Maintenance-Free Nickel Cadmium Battery 7 to 10 Year Life Expectancy
Electrical Rating	8 W maximum
Warranty	5 Years (NOT pro-rata)
Weight	8.7 lbs.
Dimensions	16.3" x 5.5" x 1.7" (414 mm x 138 mm x 44 mm) 2' of flex conduit (610 mm) Mounting center 15.7" (400mm)